EMS - Standard
Geist Watchdog 100 Environmental Monitoring System
The Geist server room environmental monitoring system web interface provides an overview of environmental measurements with real-time sensor data. All measurements are logged allowing users to collect data for trending and capacity management. The Geist Watchdog 100 offers flexible access rights and security settings with up to three access account levels. It offers secure access through the Web and supports HTTP and HTTPS protocols. Up to 50 customisable alarms can be configured with alarm escalations per sensor.
The Geist Watchdog 100 server room environmental monitoring system features four 05VDC/dry-contact analogue inputs and one digital sensor port. Up to four digital sensors can be connected using a standard splitter. A variety of optional plug-and-play sensors are available for use with the Watchdog 100 including but not limited to, temperature, humidity, airflow, water and smoke detection sensors, door position, power failure and more. One of the unique features of the Geist Watchdog 100 is its relay contact port used to energise or de-energise an external device.
At just 1U high and approximately 8.5 inches wide, the Watchdog 100 is a compact solution perfect for tight instalments. The Watchdog 100 server room environmental monitoring system is shipped with rack-mount brackets offering flexible wire management options.
Easily view and log temperature, relative humidity/dew point and external sensors over the intranet or the Web. No software requiredsecurely access the graphical user interface from a Web browser.
The Geist Watchdog 100 server room environmental monitoring system can trigger escalating alarms if temperature or humidity fall outside of specified parameters via SNMP (v1, v2c), email and SMS messages (email to SMS gateway). For example, specify an email notification to one or more users at 70° F, add another layer of personnel to the email alarm at 80° F, add your third party contractor at 85° F, etc. You can specify up to 50 alarms per unit.
The Web page interfaces up to four IP cameras (not included), allowing you a quick view of remote conditions - especially useful in event of alarm.
The Geist Watchdog 100 server room environmental monitoring system is simple to install and use, requiring no special software other than a standard Web browser. The Watchdog 100 connects to an Ethernet Network with a standard RJ45 connector and sends data in standard TCP/IP packets. It is easily configured with a simple menu using a Web browser and can be password protected with three access account level types: Administrator, Control and View Only. Users can securely access the monitor by entering its IP address.
* requires an Auto-Dialler
Temperature: -13 °F to 176 ° F (-25 °C to 80° C), +/- 0.5° C
Humidity: 5% to 95%, +/- 2%
Dew Point: -47 °F to 174 °F (-44 °C to 79 °C)
Power: 6VDC (See chart below)
Ethernet: 10/100 Mbps Full Duplex, RJ-45 receptacle
Real-Time Clock (RTC) with power backup
One digital sensor port (connect up to 4 using splitters, 600 FT maximum aggregate length)
Four Analogue sensor ports
Reset IP push-button: restores factory defaults
Warranty: 3 years